cri-one
ScopePhi IC Blueprint

ScopePhi IC Blueprint

$30.8B
$30,800,000,000
SKU SCOPEPHI-IC

Go to cart

Why you'd want it

The complete design package for one full-reticle ScopePhi die, so a chip team starts from files, not from zero.

  • Who it's for: chip teams and patrons who want the full ScopePhi die design to take toward a foundry.
  • The problem it solves: brings the top-level wiring, 40+ design cores, ball map and validation reports into one package.
  • What you get: an encrypted Blu-ray design package, non-exclusive; the listing says it ships when first silicon ships.
Complete design package for the ScopePhi (QIC-105) die: ~2.9 Z-OPS per die, 24 chiplets x 3,000 CFET voxel layers = 72,000 voxel layers, 858 mm2 full-reticle, 1,536-ball BGA, EMIC cooling + Normal Resonance Status.
Payment is by bank transfer: through Stripe up to $999,999.99, and by wire invoice above that. Questions: christopher@cri-one.com.
Contents 40 files in 34 folders ยท listed 14 November 2026
  • docs/
  • integration/
    • signal-to-core-matching.md 3 KB
  • pinmap/
    • AUTOPHI_BGA1536_pinmap_working.csv 495 KB
  • SCOPEPHI-IC-BLUEPRINT-PACK-2026-10-24/
    • docs/
    • integration/
      • architectural-decisions.md 1 KB
      • signal-to-core-matching.md 3 KB
    • pinmap/
      • AUTOPHI_BGA1536_pinmap_working.csv 495 KB
    • src/
      • cores/ 29 files
      • bump_map.md 2 KB
      • qic105_top.v 10 KB
    • synthesis/
      • config.json 2 KB
    • README.md 5 KB
  • src/
  • synthesis/
  • README.md 3 KB
  • SCOPEPHI-IC-BLUEPRINT-PACK-2026-10-24.zip 77 KB

ScopePhi IC Blueprint

Complete design package for the ScopePhi die — named for the chip-fab reticle, the mask the stepper exposes to print one shot of a die, from the same optical root as the crosshair in a rifle or microscope scope. One shot of the stepper prints the whole die. One die is the whole computer.

The story on the physical side. A single full-reticle die, 858 mm² of silicon in a 40×40 mm BGA-1536 package. Not a chiplet set on an organic substrate, not a tile farm — one die, 24 chiplet layers stacked vertically, each layer 3,000 CFET voxel-layers tall, for a total of 72,000 voxel-layers per die. Height is where the compute lives: a reticle footprint grown tall under current CFET + 3D NAND manufacturing ceilings, with EMIC cooling (patent pending) pulling heat out between the stacks and Normal Resonance Status (USPTO 19/829,894) holding the error floor at room temperature. No cryostat. No helium. A standard datacenter rack handles it.

The story on the compute side. ScopePhi is a three-strand engine: a quantum strand, a photonic strand, and a classical strand, all moving on the same clock. The quantum strand is a photonic quantum-dot layer on CMOS running at room temperature — CRI-ONE quantum is photonic, never superconducting. The photonic strand carries bytes between stacks on the QBeam wireless chain (USPTO 19/722,805) — sent, received, chained, never a “quantum processor” in the loose sense but a real wireless link that moves data between layers at the speed of light inside the package. The classical strand is the voxel array doing the counting. The three strands running together give the per-die figure of ~2.9 Z-OPS (Z-OPS = 1021 operations per second) as a floor — the measured base multiplied through the 9 owned technology elements and 18 owned technology layers; outcome scales higher as the owner credits land.

What the voxel count means in plain numbers. 72,000 voxel-layers per die, 1,536-ball out of the package to the interposer, 441 APH_HSIO and 282 APH_MGMT_GPIO balls intentionally parked inside the chip as spare lanes (what unblocked the interposer routing), 165 real external signal nets carried out: 73 DDR3, 64 PCIe, 64 QBeam RX/TX, 36 management (SMBus, JTAG, SPI, UART, charge, power). The internal quantum battery runs the die; a 75 W (or more) external supply from the PCIe slot tops it off. LED power recycling claws back 42 percent of the thermal budget as photons re-captured on the dies above and below.

What you get on the Blu-ray when first silicon ships. AES-256-encrypted. The complete tape-out package:

Non-exclusive on purpose. Multiple patrons may pledge; each receives their own copy; the IP, package program and routing pipeline stay with the inventor. Patent pending: USPTO 19/835,210 (umbrella), 19/722,805 (QBeam), 19/829,894 (Normal Resonance Status).

Inventor. Christopher Gabriel Brown (cri-one.com), sole inventor.


Exhaustive deliverable checklist

What could go wrong, and what we have done about it

Tests and measurements (internal, in the deliverable)

References

Also patent-pending under Quantum-Reactor-Scale. The compute-core architecture of this product is additionally covered by U.S. patent-pending applications 19/865,419 and 19/865,443 (filed 2026-11-06), with the chip-scale instantiation available as QRS-116 Compute Core Blueprint, and the reactor-scale embodiments available as QRS-117 Quantum Electric Reactor Blueprint (electricity-primary) and QRS-118 Compute Reactor Blueprint (compute-primary).

For the Curious

Imagine standing at the end of a short walk and looking at a single square of silicon the size of a thumbnail-and-a-half — 858 square millimetres, the maximum footprint one shot of a modern stepper can print in a single flash of light. That square is the whole computer. Not a card. Not a cluster. Not a rack. One square.

Look closer. The square has twenty-four thin floors stacked up inside it like a very short apartment building, and each floor has three thousand even thinner layers of switches — CFET transistors standing on top of each other instead of lying side by side. Seventy-two thousand layers of switches in total. The number is not a boast; it is where the current 3D NAND research ceiling actually sits, with room pulled open by the cooling system and the error-floor system that make it possible to keep stacking without the stack cooking itself or losing track of what it was counting.

Three different kinds of counting are happening at once. One of them is the kind your laptop knows how to do — voltage goes up, voltage goes down, that is a one or a zero. The second is light: tiny lasers inside the package send bytes between the floors at the speed of light, instead of running them along copper wires like a classical chip would. The third is quantum, but not the kind that needs a refrigerator the size of a dishwasher. The quantum part is photonic: quantum dots painted on top of ordinary CMOS, holding their state at room temperature. The three ways of counting share the same clock, and the number they produce together is called roughly two-point-nine Zetta operations per second. Zetta means ten to the twenty-first. For scale, the fastest supercomputer in the world right now runs at a few Exa, which is ten to the eighteenth. ScopePhi is a thousand times beyond that, printed by one shot of the stepper, sitting on a desk.

The word ScopePhi comes from two things that meet in one place. The chip-fab word reticle — the mask the stepper exposes to print the die — shares a root with the reticle in a rifle or microscope scope, the crosshair you look through to find the thing you are trying to see. I grew up in Georgia and have put my eye to a scope more than once; when the reticle word landed twice, from two different directions, the chip earned its name.

What ScopePhi actually is, under the lid: the top-level file that takes forty-odd little computing cores and wires every one of them to the right ball on the package, so the whole die behaves like one computer instead of forty. The bump map is a one-thousand-five-hundred-and-thirty-six ball grid; four hundred and forty-one of those balls go to spare high-speed lanes that stay inside the chip on purpose; two hundred and eighty-two more go to spare management pins that also stay inside; the one hundred and sixty-five remaining pins carry the real work out through the interposer and onto the carrier board. DDR3 memory, PCIe 5.0 lanes, QBeam optical pairs, management buses — those are the only signals that need to leave the die. Everything else is finished inside.

What a patron is pledging for is this: the complete engineering package to take this die from its finished design to first silicon. The design is done. What the pledge pays for is the mask set, the fab slot, the package build-out and the bring-up time — the one gate between a shippable file and a chip you can hold. When the first wafer of these dies comes back, every patron gets an AES-256-encrypted Blu-ray in the mail with every piece of the build on it: the Verilog, the cores, the bump map, the synthesis flow, the validation reports, the fab notes. Non-exclusive by design — the point is to put the file in more than one hand, not fewer. The IP, the package program and the routing pipeline stay with the inventor; a copy of what makes the chip real goes everywhere a patron asked for it.